PZ30 Lighting Distribution Box

230/400V · 9mm Modular · IP30

The PZ30 lighting distribution box is a terminal unit for 9mm-module DIN-rail appliances, 380V/220V three-phase five-wire or single-phase three-wire circuits — compliant with GB7251.3 for final lighting and power circuits.


PZ30 — PZ30 Lighting Distribution Box230/400V

9mm Modular DIN Rail

GB7251.3 Compliant

Factory Direct

Key Specifications

  • Model — PZ30
  • Rated Voltage — 230/400 V
  • Module Width — 9 mm
  • Withstand — 2000V/1min
  • Protection — IP30
  • OEM / ODM — Custom branding and packaging available

Overview

The PZ30 lighting distribution box produced by RUY Power is a terminal power distribution device that installs modularized electrical appliances with a modular width of 9mm integer multiples. The box body and the box cover are made of metal materials by bending and welding. Transparent small doors are made on the cover board. There are two types of installation: open-mounted and concealed-mounted. The box is equipped with busbar rows, earth, wiring terminals and gate-shaped guide rails. The upper, lower and bottom holes have incoming and outgoing lines.

The PZ30 lighting distribution box is suitable for installing electrical components with a modular width of 9mm and card-type installation; the wiring principle is 380V/220V three-phase five-wire system, single-phase three-wire system for single control electrical appliances.

The PZ30 lighting distribution box complies with the GB7251.3 standard.

Technical Parameters

1. Power frequency withstand voltage: 2000V/1min

2. Grounding circuit resistance: not greater than 0.05Ω

3. Grounding DC resistance: not less than 0.05Ω

4. Protection level: IP30

Installation Mode and Conditions

1. Installation is divided into two types: open-mounted and concealed-mounted: concealed-mounted: installed in a hollow wall; open-mounted: installed on a non-combustible wall.

2. Ambient temperature during installation and use: -25℃ ~ +60℃;

3. Maximum temperature during building construction: +60℃.

Frequently Asked Questions

What is the rated voltage of the PZ30?

The PZ30 Lighting Distribution Box operates at 230/400 V, suitable for the intended distribution application.

Does the PZ30 support OEM / ODM orders?

Yes. RUY Power provides custom branding, packaging and configuration for the PZ30 Lighting Distribution Box to meet project requirements.

What standards does the PZ30 comply with?

The PZ30 Lighting Distribution Box is designed and type-tested in accordance with GB7251.3.

What is the lead time for the PZ30?

Standard lead time is 15-30 days depending on configuration and order quantity. Contact RUY Power for a precise delivery schedule.

Reviews

There are no reviews yet.

Be the first to review “PZ30 Lighting Distribution Box”

Your email address will not be published. Required fields are marked *